How to Maintain Bathtubs and Showers

Regardless of the current trend, arranging the bathroom is one of the most essential tasks for most homeowners to complete. A bathtub is typically used as a piece of bathing equipment. Beyond this, it also serves as the focal point of any bathroom, taking up the most floor space and drawing the most attention away from the rest of the room. Furthermore, showers are an essential component of a bathroom because they give homeowners the option to have only a partial bath.

Since both bathtubs and showers are required in a bathroom, you must become familiar with the various tips and tricks for keeping them in good working order. 

How to maintain a bathtub 

#1 Baking soda to unclog drains 

Drains that are not kept clean or clogged can cause odours and even sewage to flow. In addition to preventing minor issues from happening, timely drain cleaning also helps to avoid larger problems from occurring. The most prevalent types of clogs in kitchen drains are caused by fat and oil. Moreover, baking soda is a kitchen essential that may be used to clean odorous and clogged drains with great success.

You can do this by pouring half a cup of baking soda down the drain, followed by half a cup of white vinegar down the drain to get the problem solved. Allow a few minutes to pass before flushing with hot water to remove the odour. This should be done once every few months to keep drains clear.

#2 Use gentle cleanser weekly 

You should do bathtub cleaning on a regular basis to keep surface filth at bay. Start by filling a half-gallon bucket halfway with boiling water and two tablespoons of dish soap and set aside. Scrub all bathtub surfaces with a scrub sponge or a stiff nylon brush after dipping them into the bucket.  

#3 Apply caulk or sealant 

Caulking and sealants can help you save money on your energy costs by closing up any holes that allow heat to escape or cold to enter your home. A bathroom’s grout lines must be adequately sealed to prevent mould and mildew from forming and minimise leaks, among other things. In addition, while installing a bathtub or shower, caulk or sealant is put at all transitions and fittings to ensure that water remains within the unit during the installation process.

When applying this inside your bathroom, you should also inspect the caulk or sealant for deterioration in and around the bathtub every year to ensure that it is in good condition.

#4 Immediately remove the stains 

Keeping the stains on the surface of your bathroom will only create an eyesore. Moreover, the longer you keep them untreated, the harder it will be to remove them. The contents inside your bathroom water are responsible for the stains in your bathtub. They are often produced by mineral deposits left over from hard water. 

You can eliminate them by combining two parts vinegar and one part water in a spray bottle and saturating the entire bathtub with the solution to erase the stains. Allow for 15-20 minutes of soaking time in the tub with this soaking solution. Furthermore, an occasional bleach treatment can be beneficial for a bathtub, but it should always be used in moderation. 

#5 Clean the surrounding tiles and walls 

Cleaning the tiles is as simple as mixing a few drops of washing-up liquid into the water-white vinegar mixture, spraying it onto the tiles, and rubbing it in with a non-abrasive sponge. You can then finish the task by rinsing it with warm water before wiping it dry with a dry cloth. Keep in mind to work from the top down and completely rinse away any tile cleaner residue after each application. 

How to maintain showers 

#1 Wipe the shower door after each use 

Cleaning the inside of the shower door after you have had a shower is recommended for proper maintenance.  This will prevent watermarks and any other type of build-up, and the door will continue to look like new indefinitely. 

Regular cleaning with a mixture of vinegar and water is also an option for your shower doors.  Fill a spray bottle with white vinegar and use it to soak the glass to do this thoroughly. Allow for at least 10 minutes of soaking time in the vinegar. However, if there is a large amount of accumulation, let it soak even longer. After which, scrub the glass using a scrub sponge that has been dipped in baking soda.  

#2 Install an exhaust fan 

The major goal of installing an exhaust fan in a bathroom is to eliminate excess moisture from the area. These fans aid in the control and elimination of scents in the bathroom. After taking a shower, turn on your fan for 15 minutes to assist in removing moisture from the atmosphere.  

#3 Don’t close the door completely after shower 

Keeping the bathroom door closed after taking a shower will keep all of the moisture contained within the space. This can foster the formation of mould and mildew in the surrounding region. To maintain air moving around your shower, remember to leave your shower door and bathroom door open after you have finished showering. This will help to dissipate any residual humidity that may have accumulated in the shower. 

Finding a trusted bathroom shower repair company 

With over two decades of expertise working with showers, tiles, and other bathroom fittings and fixtures, GIB Tiling provides workmanship and materials of the highest quality, ensuring that your shower functions correctly. This Perth shower repair company established a reputation as one of the best firms to work with for shower repairs in Perth and the surrounding area. 

How To Choose The Best Home Tiles

If you’re wondering what an excellent addition to your home is, you can always go for tiles. There’s a significant variety of styles, textures, and materials that can match your interior design needs.

Why Are Tiles A Good Choice At Home?

Tiles can add aesthetic value to your home, as well as added functionality. You usually install tiles in the bathroom or kitchen, but other parts can benefit as well. 

Kitchen

Tiles work best for kitchen counters and floors. These floor coverings clean easily, and they can resist slight water damage. 

Tiles will also add beauty to your kitchen, making your home inviting to guests. The materials best for the kitchen are slate, ceramic, stone, and metallic. 

Bathroom

Your bathroom needs tiles, especially for the shower area. Shower tiles are water-resistant, and they aren’t prone to mold when appropriately cleaned.

Tiles clean and dry quickly, so this is good news for people who splash water everywhere during showers. Choose the right texture so your floor won’t be too slippery. Try to settle with slip-resistant tiles, especially for the shower floor.

Other areas

Tiles may not be as functional in other parts of the house, but they add beauty, especially to your front porch or living room. You can choose tiles with fancy designs to make your home look inviting.

Deciding on the best tiles can be nerve-wracking. Luckily, Perth has a trusted tiling company that has the experience and serves its customers well.

Things To Remember About Bathroom Tiles

Even if the other parts of your home don’t have tiles, your bathroom will surely need them. Installing and replacing these coverings can be hard work, so you need to know which tiles work best. 

1. Consider the tile size

Your tile size should complement the size of your bathroom. Large tiles usually work well with small spaces because they look full and have less grout. 

2. Choose the design carefully

Have the tiles match the overall look of your bathroom. These pieces can bring a room together when appropriately chosen. 

3. Think about the texture

Various textures need different cleaning techniques, so think wisely before you decide. These textures can also determine how slippery your bathroom will be. Rougher tiles are suitable for the shower floor. 

4. Material is essential

There are several tiles on the market — ceramic, stone, slate, and more. It’s essential to think about which type works best with your bathroom.

Choosing Tiles For The Shower

Showers usually use tiles; they’re the best choice for this part of the bathroom. If you’re stuck on choosing the right tiles for your shower area, make sure to consider these tips.

Shower floor

Shower floors can be slippery, so you need a slip-resistant tile. Mosaic porcelain or any textured tile works excellent with your shower floor. Try to ensure the tiles have several grout lines for traction. 

Shower wall

You don’t step on your shower walls, so you don’t have to worry about slipping. You can choose your desired material, as long as it matches the design of your bathroom. A trusted tile installer can help you decide which materials work best for your bathroom. 

What Is Regrouting?

Over time, the tiles in your shower may look old and overused. The shower area is constantly wet, and the porous substance between your tiles could absorb moisture. You might think it’s time to replace all the pieces, but there’s a more straightforward solution for you — maybe your tiles just need good regrouting.

Regrouting is when you remove the old filling between tiles and replace it with a new one. This process is excellent for preserving your tiles, especially the ones that aren’t damaged.

The process is simple enough for D.I.Y., but hiring a shower tile repair company is always a better choice for good quality work.

Give your trusted repair company a call when you notice leaks and color changes in your tile grout. These services in Perth are always ready to assist you. 

How To Care For Your Grout

The best way to keep the grout in good condition is by having a regular cleaning routine. Wipe the area dry daily after you shower, and clean it with a baking soda paste every week. These steps will keep your tiles looking good as new.

Bleach can also clean the severe stains that won’t come off with baking soda. Try to keep the area clean so your shower continues to look beautiful. If the grout damage is too severe, maybe it’s time to stop trying to save it and focus more on replacement.

How To Find The Best Tile Repair Services

Always look for tiling companies with years of experience. If you don’t have one yet, our services in Perth are the best the region has to offer!

We are a compassionate team that always leaves room for innovation, meaning we’re always thinking of new ways to please our customers. Our expert workers are always ready to greet you with a smile, and we’re prepared to take on any tile challenge in your home.

Our services come at the best rates, so you’re sure to have quality service even on a budget. We also have the most advanced equipment, so you can rest easy knowing the top players in the field are working on your shower repair.

You can always reach out when you need us. For inquiries, you can give us a call for any shower tile repair emergencies. Our services are always ready!

Can Showers Cause Water Damage To Your Home?

The bathroom is perhaps the most water-resistant place in your home. Still, it is the most exposed and most vulnerable to water damage.

Numerous pipes and water systems packed tightly in such a small space can cause huge damage, especially if they start to deteriorate and leak. Continue reading to know how to find signs of water damage, the causes of damage, and how to fix them.

What Are The Signs Of Water Damage From The Shower?

Outside of your bathroom, signs of water damage are easy to spot. However, leaks, puddles, and other signs are harder to find in a place where you expect water to be.

With that said, it would be best to look out for more subtle indications of water damage in the shower. These signs would include:

  • Loosened or raised tiles
  • Flaking or peeling paint
  • Chalky or decaying wood
  • Mold spots on the wall, floor, or ceiling
  • Irremovable water stains on the ceiling or floor

What Are The Causes Of Shower Water Damages?

Leaking Pipes

Leaking pipes are one of the worst problems to have in the bathroom. These leaks are usually difficult to spot because bathroom pipes are hidden behind the walls.

You will often know you have leaking pipes once they cause enough damage. You will see discoloration come up out of nowhere before you can infer the cause.

The pipes being hidden create an even bigger problem since it creates excess moisture behind the walls. Once enough moisture builds up, you may have to deal with a mold problem growing out of sight.

Overflows

Overflowing sinks and toilets can inflict serious damage on your walls and flooring. The water may seep and gather into crevices.

Eventually, the water may build up behind and below the tiles, weakening the subfloor and any wood in their way.

Worse, overflows can travel out of your bathroom and into other areas of your home to damage property. With that said, it is always best to keep a close eye on any bubbling, cracking, or leaking.

Excess Moisture

Hot baths relax the body and relieve stress, but they also cause a lot of moisture build-up. The steam from hot showers will eventually condense on surfaces and may seep into deep areas within the tiles.

Cracked Grout

Grout used in between shower tiles is water-resistant. Despite this, the grout may crack over time or due to poor preparation and installation.

Luckily, you can easily observe if the grout between your tiles is damaged. It would be best to check that all corners are caulked and no cracks are forming on the surface. If you do find any cracks, it is best to fix them immediately before they cause any further damage.

How To Protect Your Home From Water Damage

As the adage goes, “An ounce of prevention is worth a pound of cure.” The same concept applies to preventing water damage in your home, too. Here is a list of the best practices to keep water from doing extensive damage to your home.

1. Prevent Leaks, Water, Spills, And Overflows

As much as possible, you should keep water in areas where it can drain properly such as the tub and sink. You can do this by filling the tub with the right amount of water or using a softer shower spray every time you bathe.

It would also be best to keep an eye for clogged drains, as they can allow water to accumulate and create unnecessary pressure on the pipes.

Usually, you can fix clogged drains by simply pouring acid over them.

You should also tighten down faucets and valves after use. When leaving for a long vacation, it would be best to shut off your water supply.

All of these practices prevent water from gathering where they do not belong. Allowing water to stay in puddles all over the floor not only allows it to seep into small holes, but also creates a slipping hazard.

2. Wipe Down Water Splashes And Excess Moisture

Sometimes, water will find its way onto the walls, ceilings, and floor. To keep them from doing damage, wipe down your mirrors, walls, and ceilings after a hot bath.

It would also be best to mop the floor if water splashed out of the shower or the tub.

3. Find And Repair Any Possible Or Existing Damage

The bathroom eventually deteriorates through regular use. Nevertheless, this does not mean that you should allow any damage to remain.

One of the best practices you can do is fix any loose and leaking pipes immediately. If you suspect a leaking pipe but cannot see it, you might need to call professionals.

It would also be best to be on the lookout for damaged tiles and grout. If your tiles are damaged, you can replace them and reapply grout by yourself.

These practices prevent extreme water damage and are cheaper than repairs. As such, it is best to do them regularly.

Water Damage Cleanup And Restoration

Most signs and causes of water damage can be fixed at home. However, if you are looking for a shower repair company in Perth, GIB Tiling can help you.

We provide quick and effective water damage repair and restoration for your showers and tiles. Our services are provided at reasonable and transparent prices.

We specialize in reliable yet affordable repair services. If you need a hand with difficult shower repairs, contact us today!

The Best Type Of Waterproofing For Showers

Waterproofing For Showers

One of the most common problems a person can encounter in their showers is a shower leak. However, despite its commonness, identifying the cause of a shower leak can be a handful because there are many possible causes. Moreover, if you pointed out a shower issue wrongly, you might perform an incorrect intervention for the shower leak. That act may worsen the situation.

Choosing which kind of waterproofing you will use for your shower is an essential decision. Nonetheless, you can worry less because we will guide you in this article. We will let you know the common causes of shower leaks, how you will fix them, and how you can choose suitable waterproofing for your shower.

What Causes A Shower Leak?

Before you can even choose which waterproofing to use, you need to identify the causes of your shower leak first. However, doing this step can be confusing and challenging. Since there are plenty of possible reasons that may affect your shower leak, it may be hard for you to distinguish which is due to multiple shower leak causes.

The following are the possible reasons why your shower is leaking:

  • If left unattended, cracked tiles can cause numerous severe moisture issues. Shower tiles can break due to poor grout placement, faulty installation of an anti-fracture membrane, or structural movement.
  • Shower leaks can also come from detached silicones in the perimeter joints of your shower. Usually, there is a 12-month life expectancy for silicones before they begin to split. If breakage starts to happen, water will flow beneath the tiles and cause additional moisture problems.
  • In most cases, people set mitered tiles firmly together, or if not mitered, they place ordinary tiles together closely. With that, the tile grout does not have enough room to cling the tiles. As a result, holes may appear in your shower, allowing water to flow in and cause moisture problems.
  • Structural movements in freshly-built homes or establishments can also contribute to shower leaks. Frequently, there are unnecessary structural movements that people overlook. As a result, there will be thin hairline cracks in the joints of your walls or floors.
  • Using harsh cleaning agents in cleaning your shower place is one of the major problems that cause shower leaks. It breaks and damages your grout between the tiles, leading you to worsen waterproofing in your shower.
  • Lastly, the seal between the tile’s floor waste has become degraded to the point of not being existent. This situation is evident when there is no more room in the plastic floor waste or the tiles near it for the sealant to perform its work correctly.

Shower Waterproofing Perth

How Do You Fix A Shower Leak?

After knowing the possible causes of shower leaks, it is essential to know the different types of waterproofing that you can use to fix the shower leak. Choosing suitable waterproofing determines the way on how you will repair the leak.

Method #1. Using moisture barriers

People have designed moisture barriers to keep water out of your shower and manage it as a vapor. With up to 75 percent humidity levels, the barrier covers the surface’s pores with a polymer or epoxy, preventing water vapor from getting through. Moisture barriers are ideal for addressing high-moisture slabs or areas with a risk of high moisture conditions developing.

Moisture barriers are essential for your shower’s enclosure. Tile installers have considered installing moisture barriers an excellent practice for protecting both the structure and the surface of your shower place. Even though you can design your shower place without installing a moisture barrier, it can lead you to have slight moisture build-up that can cause mould and mildew problems.

Method #2. Using waterproofing membranes

A waterproofing membrane is a thin, water-tight plastic layer that keeps moisture from leaking through a substrate. Installers typically put these membranes as part of a foundation beneath concrete slabs. When utilized at low pressures, waterproofing membranes are efficient and helpful. However, on the other side, their moisture barrier qualities are drastically decreasing when subjected to higher PSIs (pound per square inch).

Even though high pressures are uncommon for waterproofing membranes, they can still occur, especially during flooding or when the floor surface is stacked high with heavy objects and furniture. Waterproofing membranes are ideal for homeowners and business owners who want a dependable and straightforward moisture barrier to keep their showers dry.

How Do You Choose Between Moisture Barriers And Waterproofing Membranes?

Choosing which waterproofing to use between moisture barriers and waterproofing membranes depends on the situation and the shower leak issue. Do you need to stop the water or water vapor? Or are you working on a high-moisture concrete slab?

Moisture barriers work best when you need to install solid sheet vinyl. They are suitable for more concrete places, such as concrete slabs. Moreover, it is ideal to use moisture barriers in areas with high temperatures, moister and humid climates.

On the other hand, waterproofing membranes are best to stop water leaks and pressure on walls, foundations, roofs, and the likes.

Shower Waterproofing Perth

How Do You Install Waterproofing To Your Shower?

If you currently need to fix the shower leak in your shower and install waterproofing for it,  GIB Tiling Perth is always ready to assist you. This Perth shower repair company comprises expert and skilled plumbers who can help you distinguish your shower issues and advise the best solution that could last for a long time. You can contact us freely if you want to know more, and we will get back to you as soon as possible!

Quick Shower Repair Tips: Things To Do Before Hiring A Repairman

Shower Repair Perth

Isn’t it annoying and frustrating whenever you turn on the shower to find the water freezing? A bad way to start the day is with a faulty and malfunctioning electric shower.

It is probably one of the worst wake-up calls during a Monday with the threat of a busy week looming ahead of you. Although, what can you do? Either fix the issue yourself or hire a professional to do it.

Electric showers can have various issues from time to time, whether that be insufficient water pressure or a heater malfunction. Unfortunately, not everyone has the luxury nor time to fix it completely. If you are in a hurry and in a rush to fix your electric shower, these quick and easy tips may come in extra handy. 

It is vital to note that dealing with electrical components and equipment can be dangerous, especially for those with little to no knowledge and experience. When it comes to shower repairs, you can always call in a professional repairman or technician for assistance. 

Frequent Electric Shower Issues

For starters, an electric shower works by quickly heating water using a heating element or source powered by electricity, hence the name. It is considered the most common domestic water solution since it is the go-to shower for several households. It is fed by a cold water supply and primarily relies on pressure to create a satisfying and wonderful shower experience. 

Electric showers are easy to install, versatile, and help save energy. Unfortunately, because of its electric components, it is susceptible and vulnerable to malfunction and problems. 

Understanding how to find and diagnose faults in your electric shower can save you time as well as a few headaches and a bit of cash. Here are some common issues and problems with electric showers you might encounter in the future and how you can remedy and fix them.

Shower Repair Perth

1. Showering With Lukewarm Water

Tepid or lukewarm water is a frequent issue with electric showers. It is mainly caused by a malfunctioning damaged heating element or microswitch.

The case may be due to the lack of power the microswitch is getting, which can be caused by a burned-out switch. Or perhaps the heating element is failing, leading to your water not heating up as it should. 

To solve the problem, you can replace the microswitch. If the issue persists, the entire heating element may need to be replaced. 

2. The Temperature Of The Water Is Fluctuating

Another issue that might arise is fluctuating water temperature. If your shower is alternating between hot and cold, it might be caused by the lack of water flow that reaches the heating element. 

To ensure that your water supply is enough, ensure that the primary water valve is completely open. If you are experiencing low pressure in your home, you can call a professional for assistance.

3. Only Cold Water Is Pouring Out Of The Shower

If your shower only produces cold water, check the safety switch. This feature is responsible for cutting off power to stop it from reaching dangerously high temperatures. 

You can call in a professional to replace the safety switch. That should give enough power to heat the water going through your shower’s heating element. 

4. Water Is Dripping From The Bottom Of The Unit

Water can escape from the bottom of the shower unit if the pressure is too high. If the shower house is obstructed, it can cause the pressure to increase and rise.

A pressure relief mechanism is typically included in electric showers to assist and manage pressure. Whenever the pressure inside the hot water tank rises too high, the pressure relief mechanism activates, and the water flows out of the shower unit’s bottom valve. 

To prevent leaks, you can clear the blockage. Shower leaks should be addressed by a plumber or professional to avoid them becoming a recurring problem.

Shower Repair Perth

5. No Water Is Pouring Out At All

The solenoid valve is frequently the cause of water not coming out of the shower. A coil controls the water flow, and if it breaks, the valve will shut off. It’s a simple fix of replacing the coil to ensure that enough water flows into your shower. 

More Severe Problems With Electric Showers

If you are not familiar with electric safety rules, electric showers will prove to be hazardous. If you have any issue or problem with your electric shower, it is wise to stop using it and contact a professional to fix it immediately .

  • The Trip Switch is Constantly Turning Off the Electric Shower

The water is likely coming into contact with the wiring if you keep turning it on. This will cause the electricity to keep tripping out. Turning on the shower control should be avoided, and you must report the issue to a qualified and skilled repairman. 

  • Burning Odor or Smell

Problems in the wiring mainly cause a burning odor. In this instance, you must immediately turn off your electric shower at once to prevent more problems. 

  • Shower That Has Come Loose From The Wall

Due to a powerful electric current going through it, an electric shower that came loose from the wall is hazardous. It means that getting water into the wirings is highly possible, causing more severe problems.

Immediately disconnect the electricity at the breaker box and get help from a professional to have it reinstalled. 

Cold showers in the morning are enough to ruin someone’s day. To prevent it from happening, you must maintain your electric shower. Consider the tips above or check the shower repair services from  GIB Tiling Perth to assist you.